Pre-dominantly the machine for final bruting, Gives you, your dreamt beardless surface quality with excellent roundness.

The machine is equipped with complete features of Planning, Centering and Bruting with user definable pre-selectable bruting cycles.

This machine guides the operator to intelligently balance the naturals in halves and stars, resulting in higher yield, at the same time helps him in incorporating correct combination of angles resulting in polished stone with high brilliance and fire.

1. Completely automatic Control of spindle speed, stroking speed and feed, to result in better surface finish
   Spindle Speed variable from 0 to 1200 RPM infinitely variable Controlled thru program – with override facility
   Stroking Speed variable from 0 to 300 strokes / min Controlled thru program – with override facility
   Variable Feed Pulse in multiple of 1 micron with variable time interval

2. Excimer series Spindle bearing to result in better Roundness.

• Completely Automatic modes with auto control of independent movements and feed.

• User defined pre settable cycles.

• All controls on the Computer Screen.

• Excellent beardless girdle finish with roundness better than 0.03 mm.

• Programmable stroking speed to achieve excellent surface finish.

• Programmable spinning speed of the stone to avoid fall off and control bruting process.

• Auto Control of front lighting with luminance control on computer screen.
  Ergonomically designed controls keeps the operator relaxed at all the time, increasing his/her efficiency.

• Position feedback of the diamond orientation to balance naturals in halves / stars.
  Perfect judgment of tilting, if stone tilting results in better yield or balancing of naturals.

• Non contact measuring technique with highest possible magnification result in better diameter control.

• On line centering and real time control increases yield and profit.

• Very accurate “On Machine” planning

• Accuracy of stoppage as close as 0.010 mm to 0.015mm.

• Single operator can handle upto 10 machines.

• Completely automatic and overridable controls result in better control of stones with cleavage.

• Generates report for allocation and girdle marking.

• Guides the user in selecting parameters to cut more brilliant and fiery stone. These parameters can be programmed in hot keys.

• LAN configurable for complete factory automation and true IT environment.
  Warns operator about any critical size miss.

• Shortest pay back time.