|
|
|
|
|
Accurate and Advance Rough
Cavity Mapping and Inclusion Scanning, Value based planning
equipment, optimizing rough with value analysis and sawing
plans.
For the first
time, you have an access to a diamond planning and optimizing
equipment in true sense. All earlier planning equipments will
appear to be only a measuring tool. |
|
 |
|
SALIENT FEATURES
-
Any inclusion including Gletz /
piques / bubbles (VS to I) can be considered.
Shortest pay back time. Many a times, as short as 4 to 5 days.
Increases profit exponentially with a little increase in
efforts.
-
Automatic Sawing plan
generated, to maximize your profit.
-
Most advance and accurate
cavity mapping technique, thanks to its dual head scanning
technique.
-
The machine intelligence will
help you in deciding if inclusion removal or re-orientation of
inclusion will maximize your profit.
-
If the suggested plan includes
the inclusion, the machine software will show you where that
inclusion will be reflected in the polished piece. The machine
will grade the finish stone based on size of inclusion left
inside the polish stone, its orientation and its reflection /
refraction inside the polish stone. Model building accuracy of
better than 0.005 mm makes this possible.
-
Intelligent Laser marking
software leaves of the area unmarked where it matters the
most.
-
Very fast laser marking
facility. Choose and mark all option of marking in one key
stroke.
-
Free Oxygen Viewer will make it
possible for your overseas office to participate in critical
decision making. They will be able to view the provisional /
final plan on the virtual stone, and give their consent before
further process.
|
|
-
Free Oxygen Viewer is an
in-evitable tool for the manufacturing department to have a
look at virtual report of the plan. This will reduce a great
amount of paper work, and makes your factory, a truly IT
oriented organization.
-
Gone are the days of paper
reports which were suitable for the planners of the past. But
still, very advance and user definable paper report system
available, if at all you need it.
-
Eight options of cavity
mapping: Small, Medium, Big, etc.: to suite your need.
-
Eight and more options of
optimization program to choose from.
-
LAN configurable and multi
user environment software support reduces overall cost.
Inclusion placement and allocation can be done in off machine
mode to reduce load on the scanner and increase its utility
factor (reduce overall investment).
-
The software is
specifically designed to accurately suggest the most
profitable planning options in value recovery terms. In the
process the Rapaport / user specific price structure can be
used.
 |
|
 |
|
 |
|
Highly Informative, User Friendly, Graphics User Interface. |
|
Function Specification-1:1 |
|
|
| |
§
Field of view |
6.4
X 8.4mm-Analog |
8 X 11.5mm-Digital
(Optional) |
|
|
§
Rough |
0.10cts to
2.5cts-Analog |
0.10cts to
9cts-Digital |
|
§
Diamond types |
Any Cuts |
|
§
Diamond Holding |
Vacuum / Glue
Assisted |
|
§
3D-Model Accuracy |
Better then
10microns-Analog |
Better then
7microns-Digital |
|
§
3D-Inclusion Mapping |
Very
Advance-Working on Images Of Windowed Stone. |
|
§
Concavity Mapping |
Unparalleled
accuracy due to dual line source to cover cavities missed by other
conventional Scanners. |
|
§
Optimization |
Auto/Manual
Sawing, Single/Multiple |
|
§
Laser Marking |
With Advance Focusing System - select all requirements in
one go. |
|
§
Print Reports |
Available (Very
Detailed + User Defined) |
|
§
Electronic Reports |
Free Viewer
Software (Any Numbers)
Important for
manufacturing Support. |
|
§
Warranty |
12 months |
|
| |
|
|
|
Function Specification-1:2 |
|
|
| |
§
Field of view |
12.8 x 16.8 mm - Analog |
17.5 x 23.5mm – Digital (optional) |
|
|
§
Rough |
0.90 cts to 18 cts - Analog |
0.90 cts to 55 cts – Digital |
|
§
Diamond types |
Any Cuts |
|
§
Diamond Holding |
Vacuum / Glue
Assisted |
|
§
3D-Model Accuracy |
Better then
20microns-Analog |
Better then
14microns-Digital |
|
§
3D-Inclusion Mapping |
Very
Advance-Working on Images Of Windowed Stone. |
|
§
Concavity Mapping |
Unparalleled
accuracy due to dual line source to cover cavities missed by other
conventional Scanners. |
|
§
Optimization |
Auto/Manual
Sawing, Single/Multiple |
|
§
Laser Marking |
With Advance Focusing System - select all requirements in
one go. |
|
§
Print Reports |
Available (Very
Detailed + User Defined) |
|
§
Electronic Reports |
Free Viewer
Software (Any Numbers)
Important for
manufacturing Support. |
|
§
Warranty |
12 months |
|
| |
|
|
|
Function Specification-1:4 |
|
|
| |
§
Field of view |
26.6 x 33.6mm - Analog |
35 x 47mm – Digital (optional) |
|
|
§
Rough |
5cts to 140cts - Analog |
5cts to 450cts – Digital |
|
§
Diamond types |
Any Cuts |
|
§
Diamond Holding |
Vacuum / Glue
Assisted |
|
§
3D-Model Accuracy |
Better then
40microns-Analog |
Better then
28microns-Digital |
|
§
3D-Inclusion Mapping |
Very Advance-Working on Images |
|
§
Concavity Mapping |
Unparalleled
accuracy due to dual line source to cover cavities missed by other
conventional Scanners. |
|
§
Optimization |
Auto/Manual
Sawing, Single/Multiple |
|
§
Laser Marking |
With Advance Focusing System - select all requirements in
one go. |
|
§
Print Reports |
Available (Very
Detailed + User Defined) |
|
§
Electronic Reports |
Free Viewer
Software (Any Numbers)
Important for
manufacturing Support. |
|
§
Warranty |
12 months |
|
| |
|
|
| |
Hardware Specification-1:1 |
|
| |
§
Lens |
1:1 |
|
|
§ CCD
Camera |
Analog–768*576,
CCD 2/3” |
Digital–1600*1200,
CCD 1” |
|
§
Computer Req. |
Pentium IV, RAM
1gb, 17” monitor |
|
§
Operating Systems |
Windows 98 / 2000
/ XP |
|
§
Weight |
22kg |
|
§ Dimensions (LXWXH) |
70cm X 22.9cm X 20cm |
|
§ Power Consumption |
220V 50Hz 500W |
|
| |
|
|
|
Hardware Specification-1:2 |
|
|
| |
§
Lens |
1:2 |
|
|
§ CCD
Camera |
Analog–768*576,
CCD 2/3” |
Digital–1600*1200,
CCD 1” |
|
§
Computer Req. |
Pentium IV, RAM
1gb, 17” monitor |
|
§
Operating Systems |
Windows 98 / 2000
/ XP |
|
§
Weight |
27kg |
|
§ Dimensions (LXWXH) |
92cm X 22.9cm X 20cm |
|
§ Power Consumption |
220V 50Hz 500W |
|
| |
|
|
|
Hardware Specification-1:4 |
|
|
| |
§
Lens |
1:4 |
|
|
§ CCD
Camera |
Analog–768*576,
CCD 2/3” |
Digital–1600*1200,
CCD 1” |
|
§
Computer Req. |
Pentium IV, RAM
1gb, 17” monitor |
|
§
Operating Systems |
Windows 98 / 2000
/ XP |
|
§
Weight |
22kg |
|
§ Dimensions (LXWXH) |
92cm X 22.9cm X 22.2cm |
|
§ Power Consumption |
220V 50Hz 500W |
|
| |
|
|
