Prerequisite
for Helium Class System
|
1 |
Help |
||
|
2 |
|||
|
3 |
|||
|
We are
attaching the standard shapes which are covered in Helium with its parameters
explanations see shape.xls from this link
. This are
some standard shapes which are known as full
cuts where you can modify all angles and heights with its all steps. Other
then this there are ASC cuts which can be made in GEMCAD (Please purchase
GEMCAD from http://www.gemcad.com) Please note that for all ASC cuts you
can change only 4 parameters viz
Pavilion Heights , Crown Heights , Girdle Heights and Length
to Width ratio. Individual parameters or angles can not be changed in this
ASC cuts (which are not full embedded cuts or DLL Cuts) for more help
contact lexus at support@lexus-com.com |
|||
|
4 |
Reports |
Help |
|
|
5 |
Printers |
B/W Laser Printer-
Samsung /Dymo Label Printer- 330 Label Setup :
Address |
|
|
6 |
Network Switch 8Port |
Network cables |
|
|
7 |
Power Plug Adapter
(Country specific) |
To convert into Indian
Plugs adapter |
|
|
Please send us your updated (Changed) files / snapshots to
support@lexus-com.com |
|
1. Price.xls 2. Discount.xls 3. Description
of other shape you require 4. Your
new shapes (Give us the ASC files) 5. Reports
(Send us the number or screenshots) and any modification if needed) 6. Dymo Reports(Send us the number or screenshots) and any
modification if needed) 7. Name
/ Brand / Model of Printer - which you are going to use 8. Name
/ Brand / Model of Dymo Label Printer - which you
are going to use (with its sticker size) 9. Your
Power plug adapter (Photo) 10. Network
Switch -Name / Brand / Model of Dymo Label Printer
- which you are going to use 11. Computer
-Name / Brand / Model of Dymo Label Printer - which
you are going to use |