-
Use of super
precision P2/P4 quality matched pair angular contact bearings
guarantee dynamic axial run out within
0.001 mm
-
Large 60 mm bore
duplex matched pair, mounted in tandum at
the nose - end ensures unmatched Life performance for years to come.
-
Duplex matched pair
mounted in tandum at the
tail - end supports the spindle under 500
N preload force. This ensures very high stiffness to take care of
small unbalance force coming from the unbalanced Scaife.
-
Expanding nose
always ensures concentric mounting of balanced Scaife eliminating
requirement of balancing the Scaife on the mill after mounting.
-
Integral scaife
drive allows use of open top mills, enhancing appearance of the
factory and allowing easier operation.
-
The complete drive
assembly is dynamically balanced on high precision balancing
machine developed specifically for this captive purpose.
-
The super precision
bearings are greased for life, and require no attention during their
many years of service.
-
The super precision
bearings are greased for life, and require no attention during their
many years of service.
-
Ultimate rotational
accuracy, due to quality manufacturing set up.
-
Single piece
stabilized spindle, resulting in maximum stability. (Scaife will be
actually fixed on
the Spindle, and not
on a screwed - on flange).
-
Ergonomically designed
unit ensures fatigue free working.
-
Available in 2 station
and 4 station version.( Any client specific design can be made
available )
-
Complete with Dust
collection ducting system.
-
Cast iron top and
filled frame ensures good damping.
-
Machined top with anti
roll edge to avoid rolling down of pots placed on the table.
