EOS EconoBruter Mark II

EOS Table

EOS EconoBurter

Double Spindle

EOS Bruter

Fancy AutoBruter

3G AutoBruter

Fancy Centering

Centering Machine Module

Fancy Full Rotation

Fancy Half Rotation

Gluing Station

Single Spindle

Rotary Stick

Crown Bruter

Pavilion Bruter

Barrel Bruter

Maxi Bench

5 line Generator

Allocation & Planning

Laser Sawing & Inscription

Polishing

Grading & Marking

Software

Rico Group Products

Maintenance Group

Function:

1. Barrel/Cylindrical bruting of round diamonds.

INTRODUCTION:

     These machines are pre-dominantly used for final bruting of inexpensive goods, to control the diameter and thus optimizing the yield. The machine is equiped with five independent graphical lines of diamond, guiding the operator in controlling naturals. Based on guideline from line generator “on-machine” centering will be performed by the operator, which will leave out all transfer errors.

     Because of the single stone control concentration, larger magnification (between 25 X to 40 X) and better centering accuracy is possible. (Two stone controls also offered).

Salient Features:

• The Machine takes total control of bruting through camera and grapgical lines.

• Suitable for both, Sawable & Makeables.

• On Line centering and real time control, resulting in optimum yield and maximum profit.

• On machine planning results in accurate planning, centering & estimation.

• Accuracy better than 0.015 mm. (Better than 0.010 mm for small stones).

• Beardless surface finish, requiring no further girdle finishing.

• Single operator can handle up to 10 machines.

• Correct speed for every stone thru variable speed control.

• Total control on the process and safe operation, adds to the recovery.

• Customized to your size of stones for maximum accuracy.

• Very Economical compare to Autobruters.

STANDARD ACCESSORIES:

1.  LN key (T-Handle) - 3 mm

2.  LN key (T-Handle) - 4 mm

3.  Die Pot

4.  Hammer - 1 no

5.  Spindle Spanner Set - 1 no

SPECIFICATION